Shopping Cart
No items added.
close
Navigation
Currency:
Manufacturers

DigiPoxy MMA fast cure 5 minutes Black

Availability: In stock
SKU: BRC921
Quick overview MMA fast Cure 5 minute.
41.89 (NZD)
  • Digipoxy Fast cure 2K epoxy MM 5-10 minutes Extreme fast 5-10 minutes working cure full strength after just 30 minutes. Metals , Carbon , Plastic..

    FEATURES:

    • High viscosity, non-sag application
    • Fast cure system
    • Excellent tensile and impact strength
    • Primerless metal bonding for most metals
    • Excellent environmental and chemical resistance
    • Minimal surface preparation
    • Choice of working times
    • MMA based 1:1 mix ratio
    • Fixture time is the time to achieve 70% of ultimate strength in lap shear

     

    TYPICAL PHYSICAL PROPERTIES at 24°C (75°F):

    Tensile Strength MPa (psi) 35 – 40 (5,076 – 5,802)

    Lap Shear Strength MPa (psi) 18 – 25 (2,611 – 3,626)

    Maximum Tensile Elongation (%) 5 – 10

    Service Temperatures °C (°F) -40 to 100 (-40 to 212 )

    Tensile Modulus MPa (psi) 1,100 – 1,240 (160,000 – 180,000)

     

    RECOMMENDED SUBSTRATES:

    Composites: epoxy laminates, FRP (polyester/vinyl ester), gelcoats

    Metals: aluminium, carbon steel, stainless steel

    Thermoplastics: ABS, acrylics, vinyl, PVC, polycarbonates

     
Product description
  • Digipoxy Fast cure 2K epoxy MM 5-10 minutes Extreme fast 5-10 minutes working cure full strength after just 30 minutes. Metals , Carbon , Plastic..

    FEATURES:

    • High viscosity, non-sag application
    • Fast cure system
    • Excellent tensile and impact strength
    • Primerless metal bonding for most metals
    • Excellent environmental and chemical resistance
    • Minimal surface preparation
    • Choice of working times
    • MMA based 1:1 mix ratio
    • Fixture time is the time to achieve 70% of ultimate strength in lap shear

     

    TYPICAL PHYSICAL PROPERTIES at 24°C (75°F):

    Tensile Strength MPa (psi) 35 – 40 (5,076 – 5,802)

    Lap Shear Strength MPa (psi) 18 – 25 (2,611 – 3,626)

    Maximum Tensile Elongation (%) 5 – 10

    Service Temperatures °C (°F) -40 to 100 (-40 to 212 )

    Tensile Modulus MPa (psi) 1,100 – 1,240 (160,000 – 180,000)

     

    RECOMMENDED SUBSTRATES:

    Composites: epoxy laminates, FRP (polyester/vinyl ester), gelcoats

    Metals: aluminium, carbon steel, stainless steel

    Thermoplastics: ABS, acrylics, vinyl, PVC, polycarbonates

     
Additional information
Customers who bought this item also bought

AR Power 6.6v 2100mAh LiFE RX Pack

2100mAh Life RX pack
58.58 (NZD)